Machine’s use:

The machine is widely used in the appliance glass, lighting glass and die-casting process glass industry,.By adjusting the parameters, it can produce hot bending glass and melting glass of different thickness,It improve production efficiency and save energy. Its characteristics are: Mold making simple, rapid transformation, with a small power consumption and high efficiency.

Principleandstructure Description:

1, The machine” work principle is: When mold and glass are ready, push them into the furnace from the feed port,then get them out from the discharge port, That is a standard finished hot melting or hot bending glass.
2, The machine is made up by feed zone, heat forming zone and discharging zone, the furnace is made from steel,Inside the furnace using high-grade cotton insulation ,insulation bricks and other insulation systems. Using Microcomputer temperature controller, its power system with frequency control.

Specifications and stechnical parameter:

1. Processing of glass parameters:
a, lighting glass: MAX700 * 700MM
b, hot melt glass: MAX450 * 450MM
c, glass mosaic: normal size can be.
2. Equipment Size:outside size :length 40 m × width 1.6 m × 1.4 m high Inside Dimensions: width 1 m × high 150mm-380mm (Height with Curved Glass regulator)
3. Running speed: operating speed of 0.2-1.8 meters / minute, the speed can be adjusted
4. Equipment power: Design Power: 150KW (adjustable on the temperature zone) is reserved 21KW (under the heated area) Total: 171KW (Practical 100KW)