Hydrogen Or Vacuum Induction Sintering Furnace2016-3-22
Technical Parameters：
Uniform Temperature Zone Size: Φ400mm×600mm
Max Temperature：2400℃
Working Vacuity：≤1×10-2pa
Charging and Discharging Method：lifting...
|
Horizontal Vacuum Annealing Furnace2016-3-22
Technical Parameters：
Uniform Temperature Zone Size:Φ（300-1500）mm×（1000-6000）mm
Working Temperature: 800-1600℃
Working Vacuity: 1×10-2pa
Heater: Molybdenum rod...
|
Ceramic Surface Metallization Hydrogen Sintering Furnace2016-3-22
Technical Parameters：
Working Temperature: 1600℃
Uniform Temperature Zone Size：Φ600mm×900mm
Heater Form：Upper, Middle, bottom three groups, molybdenum wire ...
|
High Purity Alumina Sintering Furnace2016-3-22
Technical Parameters：
Uniform Temperature Zone Size:Φ (100-450)mm×(100-600)mm
Working Temperature：2100℃
Working Vacuity: 1×10-3pa
Heater Form：tungsten wire...
|
Laser Ceramics Sintering Furnace2016-3-22
Technical Parameters:
Uniform Temperature Zone Size: Φ（200×500）mm ×（150-800）mm
Max Temperature：2100℃
Ultimate Vacuity：5×10-5Pa Working...
|
Photoelectric Ceramics Sintering Furnace2016-3-22
Technical Parameters:
Uniform Temperature Zone Size: Φ500mm×800mm
MaxTemperature：2100℃
Ultimate Vacuity：1×10-5Pa
Working Vacuity：1×10-4Pa
Working...
|
Aluminum Nitride Sintering Furnace2016-3-22
Technical Parameters：
Uniform Temperature Zone Size: Φ460mm×500mm
Max Temperature：1950℃
Working Temperature：1850℃
Heater Form：Side tungsten sheet heater...
|
Heat Shield Used In Sapphire Thermal Field2016-3-22
Relative to other materials, tungsten & molybdenum used as heat shield have the
characteristics of low vitalization in high temperature,less pollution to crystal,...
|
Heater Heat Shield Used In High Temperature Furnace2016-3-22
Xi'an Refra Tungsten & Molybdenum Co.,Ltd is one of the best China heater & heat shield of
high temperature furnace manufacturers and suppliers, and as a...
|
Heater Used In Sapphire Crystal Growth Furnace2016-3-22
REFRA is specialized in producing thermal zone of high temperature furnace. The max temperature in furnace can reach to 2500℃. There are four structures: tungsten...
|
Detector Collimator Anti-Scatter For Alpha Ray Shield2016-3-22
Specification: (10-20)mm×(200-1450)mm×≤3000mm;
Technical Requirement:
Chemical Component: Mo≥99.95%
Density: ρ> 10.10g/cm3
Grand Size: D≤150μm
Average...
|
Molybdenum Plate Used For The Production Of Tft-Lcd And Thin Film Solar Cell2016-3-22
Specification: (10-20)mm×(200-1450)mm×≤3000mm;
Technical Requirement:
Chemical Component: Mo≥99.95%
Density: ρ> 10.10g/cm3
Grand Size: D≤150μm
Average...
|
Molybdenum Alloy Material With High Temperature Plate2016-3-22
Specification：(0.1-20)mm×(50-600)mm×(100-1500)mm
Chemical Component：
Main Components：Ti：0.4-0.55%; Zr：0.06-0.12 %; C：0.01-0.04%
Density：≥10.1...
|
Cross Rolled Molybdenum Plate Sheet2016-3-22
Molybdenum Plate:（3.0-6.0)mm×800mm×800 mm
Standard：GB/T3876
Chemical Component：≥99.95%
Density：≥10.10g/cm3
Molybdenum sheet: (0.2-1.0)mm×700mm×700...
|
Rotary Tungsten Molybdenum Anode For X-Ray Tube2016-3-22
Specification: Φ（60-70）mm
Special specification can be produced according to customer’s requirement.
Chemical Component: W:95%; Re:5%; Mo:TZM
Density: W:...
|
Tungsten Heavy Alloy Rod2016-3-22
Specification：Φ(10-100）mm×L mm
Chemical Component: W:90-95%; Ni:3.5-7%; Fe:1.5-3%
Density：≥17.5-18.1 g/cm3
Tensile Strength：780-980MPa;...
|
Home
Selling Leads